The ring die as well as journalism roller of the wool pellet mill turn at a consistent rate, and also the functioning state of each immediate is essentially the same. If the amount of feed product is the same, the power consumption need to additionally be fairly steady, and also the current will certainly be reviewed the motor. Likewise relatively stable.
When the wool pellet mill machine is functioning, we change the feeding amount as long as the material thickness in the feeding area is less than the maximum beginning factor of journalism location, it will straight influence the size of the reliable workspace of journalism location and also journalism area, as well as create the existing to flow.
If there is any type of impact, it will no more create changes in current as well as wool pellet mill outcome. Since the density of the product layer in the feeding zone goes beyond the optimum starting factor of the pressing zone, the period in between the pressing zone as well as the pressing area is constant without any adjustment. In the interval where the multi-feed product lies, the clamping angle is above the essential rubbing angle, and the material will certainly not be pressed right into journalism area.
Related post: https://richipelletizer.com/wool-pellet-machine/
In this way, with the increase of the feeding amount of the wool pellet mill, the balance of in and out is broken, and also the in is higher than the out, and the material layer in the feeding location is It will gather thicker and thicker till all the gaps are loaded and also obstructed to the feed port, to ensure that the wool pellet machine can not function generally. Currently, the current will enhance.
In the real job of the wool pellet mill, with the adjustment of the feeding amount, the immediate outcome and also the current of the major motor will certainly change as necessary. And when the feeding density does not exceed the maximum beginning factor of the pressing area, it will certainly not trigger increasingly more material layers in the feeding area because of the boost in the quantity of powder we feed.
As has been claimed prior to, the location that can create instantaneous outcome and power usage changes must be both areas of work and also product layers - the compression location as well as the wool pellet piece of equipment extrusion location, so we think that the 3rd location discussed over- - The sensible presence of the feeding area has specific problems.
That is to claim, the fed product layer is distributed in the compaction area, the extrusion location and also the feeding location whose total density does not surpass the maximum entry factor of the compaction area.
The wool pellet mill will certainly work normally under the permitted power. If the amount is also huge as well as goes beyond the thickness of the optimum starting factor of the compaction location, the product layer will gather and gradually boost, and the wool pellet making machinery will not work usually. Existing is fluctuating.
Via the above analysis, allow's talk about some phenomena displayed by the wool pellet mill under two feasible working problems:
( 1 )When the power of the major electric motor is not large enough compared to the corresponding wool pellet mill granulation parameters, the density of our feed goes to the end of the extrusion zone and also the optimum access factor of the compression area (this will vary with the raw products, compression proportion, efficient length-diameter ratio, humidity, pressure rollers and also various other variable factors to readjust appropriately), usually will not surpass the optimum beginning factor, with the rise of the feeding quantity, the compression area will certainly alter appropriately.
The length of the period will be shortened, and the interval size of the press location will slowly enhance accordingly, as well as the current of the major electric motor will additionally gradually increase until it gets to the optimum permitted use. If the existing gets to the defense worth we established, as well as the thickness of the feeding product has actually not exceeded the thickness of the maximum starting factor of the wool pellet machine pressing location, if the feeding quantity is boosted, the safety system will act, as well as the excess powder will be released. In order to make sure the typical function of wool pellets.
( 2 ) Expect the power of the primary electric motor is very large or the motor falls short to overload after the thickness of the feeding product exceeds the density of the optimum starting point of the pressing area due to the extensive adjustments of lots of variables. At this time, the powder fed to the people can not boost the moment outcome, nor will certainly it cause the rise of the major motor existing, however can only remain to increase the powder pile built up in the machinery up until the inner dental caries of the wool pellet press equipment is obstructed.
Cause the pellet making machine to not function correctly. Obviously, this special sensation hardly ever happens in real production (if the raw product dampness is as well large, the effective aspect ratio is also small, the stress roller is drastically put on and also the space is not changed properly, the raw material is changed, and so on, this phenomenon may happen), this is our unwanted conditions.
In-depth evaluation of the initial typically used functioning state, it is easy to understand that on the premise that the pertinent conditions are unmodified, with the adjustment of the feeding quantity, the interval length of the compression zone and also the extrusion zone is within a specific array Matching adjustments are additionally made (the feed flow rate is lowered, the length of the extrusion zone is decreased, and the length of the compression zone is prolonged; otherwise, the extrusion zone is extended and the compression zone is shortened), as well as the feeding amount does not surpass the pressure. When the thickness of the optimum starting point of the tight location is concerned, the lengths of the above 2 intervals are not a constant value when this write-up is created. The bigger the extrusion area length value, the greater the wool pellet maker production performance as well as the longer the pellet length per extrusion per roller.
Consequently, it is wrapped up that the variables of current instability under the condition of regulating the feeding amount require to be explored from the dampness web content of the raw material, the effective aspect ratio is also tiny, the pressure roller is severely worn and also the void is not adjusted effectively, as well as the raw products are changed.
RICHI MACHINERY has been established for more than 25 years, specializing in wool pellet mill up for sale, the development as well as manufacturing of single/complete pellet assembly line such as animal feed, wool fuel, timber waste, lawn, straw, organic fertilizer, and so on, and also supply style and also services for EPC/Turnkey projects!
